I just tried your Synthi patch, I’m having a lot of fun with it! I’m finding some nice vowely sounds I hadn’t found before I really like the layout too, it’s easy to find where everything is. In my own recreations I chose to put all the stuff that’s under the hood off to the side to free up the interface, your knob layout could also easily accomodate this.
What surprised me was the way you managed to get the triangle-to-saw shape down with such a simple solution! I have tried so many different methods and only got it to morph correctly in one direction, the other one gets close but is unstable, I have to implement this in my version too!
I would like to suggest some minor improvements:
-Oscillator 1 shape results in doubling the frequency on extremes, I found a quite neat way to get the correct shape without changing the frequency, using a synced up Bidoo TiARE with control over the X axis of the phase distortion curve.
-For Osc 2 and 3 you can simply ditch the EvenVCOs since you already have a squarewave with PWM at your disposal from the Bogaudio VCO, which makes the waveforms line up just like it’s described in the manual. This way you also fix the synchronization issue both these oscillators have, and the Bogaudio VCO can easily be switched to be an LFO
-The filter volume was a bit low, so I turned the Drive knob up, although I would suggest routing the Filter Level control to the Drive CV input on Lateralus, so you can really drive the signal into distortion
-The reverb was clipping so I turned the input volume down to 50%
All in all I think it turned out really well, I don’t know how close our recreations sound to the original of course, I would love to be able to play the real thing someday,
Until then I will continue to play with this one a bit more, I will let you know what else I find! I could send you my revised version if you like?