Ok let’s try this :
1 Close Rack
2 Go here and turn of -Free (make the button blue) https://vcvrack.com/plugins.html#stoe
3 Go here scroll down and load the latest for your OS
(click the assets button if no zips are showing) https://github.com/stoermelder/vcvrack-packone/releases/tag/Nightly
4 Put the zip in your Documents\Rack\plugins-v1 folder
5 Start Rack
6 open module browser and be amazed 
2 Likes
Solved! I had looked for something overwriting it a bit before quitting for the evening yesterday but it was under ‘PackOne’ and I missed it haha. Thanks everyone!
1 Like
new problem. the audio 64 works now pretty fine. but! i would need two of them running. - i have an RME-MADIface (64 outs) AND an RME DIGIface (4 x ADAT on USB to feed my 4 Expert sleepers ES-3) the problem is - my CV outs now are 1 - 32 on the MADIface and 65 - 97 on the ADATS. Both interfaces are put together in an aggregated device.
any ideas?
I guess when you say „aggregated device“ you are on Mac? It is very little work to create an AUDIO-128 if that helps, I just need to do a panel for it… but, I won’t advertise these modules much because for me they are a workarounds until a better solution is available, natively in Rack or by some sort of expander-solution which would need a complete rewrite of the AUDIO-modules.
2 Likes
jep. im on mac. im also on linux with alsa (jack) but there i only have 64 outs. 
so it works there … the 128 would be nice - even if i know, that this is only a workaround and a hughe waste of power - to permanent map all of the 128 outs …
and YES! the audio-engine of vcv should really be rewritten … YES!!!
1 Like
Already done:
2 Likes
I’m using Blackhole to route vcv to Reaper (or other DAW). I can use multiple audio 16 modules and set them up as groups of 16 channels for live or recording work. It seems to work fine.
1 Like
Unrelated entirely, but holy hell thats a gorgeous setup… May I ask how much that cost (ballpark) and how long it took to set up?
I have a need for more than 16 in/out 
Still buying modules, but I am using my RME MADi FX for mixing/routing between vcos’/vcf’s etc and software modulation for envelopes/lfo’s/sequencing etc. This allows for total recall of patches… (well it would support recall if VCV rack supported program change and banks/presets, at the moment i am using VAZ modular and some reaktor)
1 Like
you can use multiple instances of the VCV “Audio 16” module, I can’t remember if it automatically continues the channels on the second module, or if you need to setup an aggregate device first, but it works. i too would love a clean solution (a larger audio module with more channels) but it works if you use multiple instances of the module.
As for presets, I use Stoermelder’s “8 Face mk2” module with the expanders to create presets for my entire VCV rack patch and it works really well. Give it a try.
It would be nice if the 8face module had a feature where in one click you can map every single module to it, instead of tediously clicking each one by one. But it works great
I would settle for a ‘click and drag’ selection method, but yeah it works very well for presets.
click and drag sounds even better