Thinking about this some more, I came across two more ways of creating weighted Bernoulli gates, using either Fuse (Stochastic Telegraph) or ACC (docB):
Two more progressively increasing Bernoulli Gates
In addition to the PILE (stoermelder) method , a (monophonic) weighted Bernoulli gate can also be created using Fuse (Stochastic Telegraph) plus Chances (Count Modula).
In Narrow mode, Fuse starts at 10V (set in context menu) and decreases the output on the OUT port with every trigger input. The decrement is set by the LIMIT knob.
A limit of 10/100/1000 decreases the output by 1/0.1/0.01V per trigger, respectively. A good starting point is e.g.…