Envelope Generators
AD Envelope
The envelope cannot be retriggered during the Attack phase.
VCV Fundamental AD Envelope.vcvs (8.8 KB)
Simple AD Envelope
There is no reset, and if the RANDOM LIN port ever outputs a value other than 0V or 10V then the construct needs to be replaced (This should not happen, but…)
VCV Fundamental AD Envelope2.vcvs (7.9 KB)
A(DH)R Envelope - Attack (Timed Decay/Hold) Release
The envelope cannot be retriggered during the Attack phase.
The timing of the Decay/Hold phase is controlled by the LFO, and very precise. The timing of the Attack and Release phases are controlled by the ADSR, and unfortunately are not very accurate (but they are consistent)
Patching an LFO into the Attack, Decay, Sustain, or Release CV inputs can yield some complex envelopes, especially if the phase gates are used to reset/sync the LFO to get consistent results.
Patching the Idle Gate output to the Trigger input and then pressing Reset puts the envelope in a loop to yield a complex LFO.
VCV Fundamental A(DH)R Envelope.vcvs (22.4 KB)