v2.4.1 Beta 11 (v2.4.1b11) is available as Pre-release (GitHub) - October 2nd, 2023.
- KlokSpid MkII: new feature: when the menu system is disabled (home menu on touchscreen is gray, and the info display is blue), by default you can set the BPM/frequency (or Ext.CLK mode). However, by pressing Cancel/Exit button, you can edit the output’s modifier “on-the-fly” (obviously, for the current/last selected output): its current modifier is indicated in info display (Modifier: xxxx, blue color). By moving the continuous encoder, this select next/previous modifier. No validation is required (when selected, the modifier is immediatly validated). This special edit mode is staying active during 15-second timeout (since last action on continuous encoder or buttons), then the module returns to regular CLOCK (or Ext. CLK) display/edit. The new tiny display located above Cancel/Exit button indicates what the ‘action’ is, if you press it: MOD indicates it will edit modifier, BPM for tempo, FRQ for frequency, or EXT for external clock mode. While browsing menus/pages, it displays - - - (red color).
-------------------------------------------
-
KlokSpid MkII + KX expander: fixed strange (not critical & random) bug: when placing KX expander along left side of KlokSpid MkII module, the RUN Input Role or OFS.1/OFS.2 Assign. menu/page may appear (exactly like by doing left mouse button click over RUN, OFS.1 or OFS.2 LED). I have added some “guards” in source codes to prevent this troublesome behavior, definitively.
-
KlokSpid MkII: reworked a bit the Wavetable Manager base menu (from waveform selection, go to page 3 or 4 by clicking blue arrows located above “SINE” box). Then, do a right mouse button click over relevant WAVETABLE box, in order to open Wavetable Manager for it. Now, a simplified WTx Settings menu item will permit - in the future - to configure the wavetable but from unique page. This menu item is locked (grayed) while the WT slot is not assigned to a WAVE file, or if a Serum-compliant wavetable file is already assigned to the slot (in this case, they’re nothing to configure, because number of cycles and wavetable morph mode are already tagged inside the .wav file for wavetables saved by Xfer Serum).
-
KlokSpid MkII: fixed PULSE issue when changing the output modifier (output ratio) from very slow to faster factor. Now works as expected during output’s phase reset/restart handler). Other available waveforms (triangle, sine, S&H, constant, and one-shot) was not impacted, however.
-
FroeZe-SX expander: fixed a stucked situation while %SWING CV input jack (FroeZe sequencer) is connected.
-
FroeZe-SX expander: when a instrument-related box is switched from UNUSED to SWING (left mouse button click on instrument’s box on touchscreen), the SWING label and its related input LED (as red) are blinking fast while the related input jack is not connected.
-
All modules: fixed random unstabilities, in particular when VCV Rack 2 is starting and reloads “autosave.vcv”.
Issue report / Technical / Help: please use this thread. Thanks in advance. 