Core Midi-4: Change Gate Length?


Is there a way to configure the gate length that Midi-4 or Midi-1 is outputting?

(Nik Jewell) #2

The gate length lasts as long as you send a gate signal (e.g. a key press).

If you want to override that then use a gate length module module such as Alikins Gate Length or AS Regate.

(Lars Bjerregaard) #3

… or ML-modules Trigger Delay


thanks, I tried out the gate delay modules but still the same problem. for more context I was testing with tidalcycles using the superdirt midi functions. eventually I had to add a # sustain 0.09 in order to (i guess) get the noteoff action to happen quick enough to. i haven’t tried sequencing with any other device via midi yet

(Nik Jewell) #5

Earlier @Vortico was commenting on another thread and taught me about the XY Problem. This would appear to be an exemplar.

Sorry, that sounds arsey, but I didn’t understand what you were asking. I’m not familiar with tidalcycles but it looks like you have found the solution. Midi noteoffs are quite a gotcha sometimes.

Cheers :slight_smile: