Good evening everyone. I bought the Behringer ( Euphoria UMC1820 ) half a year ago to use its ADAT connection with an ES-3 and ES-6 Module to integrate with VCV. The setup itself works fine.
VCV -> Audio 16 Module -> ASIO -> UMC ADAT(in 11-18, out 13-20) -> ADAT into ES modules However… since the Audio 16, name implies, offers only 16 channels and UMCs ADAT channels range from 11 to 20, the following happens: the device is split and you have to chose between a: XLR/Line (in 1-10, out 1-12) & ADAT (in 11-16, out 13-16) b: ADAT (in 17-18, out 17-20)
Result: I can only feed 4 channels of my ES-3 either way.
Any attempt to open two Audio modules results in a direct crash of VCV 95% of the time. The other times it crashes only the old instance of the module with VCV crashing a few minutes later.
Drivers are up to date. Use a windows 10 system, i9 intel (6 core), nvidia quadro p2000 5gb, 32gb RAM, SSD with ample space. Tried it with my other Laptop too though and had the same problems.
The driver can’t cope with two signals it seems and the module is bound to split the Interfaces channels above 16.
Any suggestions on how to fix this? i.e. any software that acts as audio interface and mediates between VCV and driver?