wooooooooooooowwwwwwwwwww yeaaaaahhhhh
Major Proper!
OOHH YESS!!!
Counting down the days until I can use these modules TIA
Poi dite che non vi voglio bene;
avevo sentito il pianto greco ed allora oggi me la son presa di festa per compilare su win10 e Linux
(ho installato da zero, msys su win + un virtual box + una fedora)
ancora compilando…
We love you despite the crying greek.
NYSTHI power!
test release UNTESTED on LINUX!!!
here:
#v2.0.0beta1 (2021-10-10)
BZ-MAPPER
- DEBUG: current NODEs status not highlighting
BZ-ENVELOPE
- DEBUG: current NODEs status not highlighting
SIMPLICITER
- DEBUG: “STOP recording with append” was inverting channels (#338)
- FEATURE REQ: press REC with SHIFT to activate automatic APPEND for current REC
CONFUSING SIMPLER
- DEBUG: “STOP recording with append” was inverting channels (#338)
- FEATURE REQ: press REC with SHIFT to activate automatic APPEND for current REC
POLY SCALA QUANTIZER
- DEBUG: in midimap mode, the root base (from contextual menu) must be applied to extra outputs too (#333)
PROGRAMMER
- feature request from Pyer: add a contextual menu to use a STROBE signal to sample
the incoming CV signal in ADDR. The STROBE signal is the PULSE in > and PULSE in <
sockets.
02NAGOL
- feature request: add reload trigger
SLOPE DETECTOR
- classic CGS module
- detects rise steady and fall states on signals and outputs a GATE
CV SPREAD
- simple module in Serge style
- creates correlated CV out from a INPUT and OFFSET
DUAL PROCESSOR
- classic CGS module
- dual CV/audio mixer, scaler, offsetter
INFINITE MELODY
-
highly inspired from the BOCGS MARSH panel CGS module
-
it’s a CV melody generator based on a set of 1 BITSHIFT register + 4 analogue shift register
-
a signal must be sent to the NOISE input the signal is compared against the SENSE knob value (or to the VC SENSE input, if connected) when the incoming value is greater than SENSE the LED is ON, otherwise is OFF the LED on represent binary 1 and OFF is binary 0. If a clock signal is applied to CLOCK the bitshift register is shifed to the left and the value of SENSE comparator is written in the first bit. EXAMPLE with 6 clock consecutive:
main register status 000 000 (only 6 bits are important)
pulse 1 → SENSE is 1 → main register is 000 001
pulse 2 → SENSE is 1 → main register is 000 011
pulse 3 → SENSE is 0 → main register is 000 110
pulse 4 → SENSE is 1 → main register is 001 101
pulse 5 → SENSE is 0 → main register is 011 010
pulse 6 → SENSE is 1 → main register is 110 101there is a secondary clock coming in ADVANCE
for every pulse in ADVANCE the main register is advanced into the 4 digital shift registerthe ADVANCE can be in 1/f mode or f mode (called RANDOM MODE)
in f mode the result is this: simulating the main register with 110 101
pulse 1:
reg1 110 101
reg2 000 000
reg3 000 000
reg4 000 000pulse 2:
reg1 110 101
reg2 110 101
reg3 000 000
reg4 000 000pulse 3:
reg1 110 101
reg2 110 101
reg3 110 101
reg4 000 000pulse 4:
reg1 110 101
reg2 110 101
reg3 110 101
reg4 110 101in 1/f mode,
register bit 1 receives the bits every pulse
register 2 receives the bits every 2 pulses register 3 receives the bits every 4 pulses register 4 receives the bits every 8 pulsessimulating the main register with 111 111
pulse 1:
reg1 000 001
reg2 000 000
reg3 000 000
reg4 000 000pulse 2:
reg1 000 001
reg2 000 001
reg3 000 000
reg4 000 000pulse 3:
reg1 000 011
reg2 000 001
reg3 000 001
reg4 000 000pulse 4:
reg1 000 011
reg2 000 001
reg3 000 001
reg4 000 001pulse 5:
reg1 000 111
reg2 000 011
reg3 000 001
reg4 000 001pulse 6:
reg1 000 111
reg2 000 011
reg3 000 001
reg4 000 001pulse 7:
reg1 001 111
reg2 000 011
reg3 000 001
reg4 000 001OPERATIONS I’m too tired…
MODULO MAGIC
- highly inspired from the BOCGS MARSH panel CGS module
- it’s a CV folder based on modulo arithmetics
- a great explanation is visible here in the TuesdayNightMachines blog
mix4 mix8 mix16
- visually renamed with real name (before was 4MIX 8MIX and 16MIX)
SUSSUDIO
- add contextual menu command to output 0V if sample is stopped/paused
MUSICALBOX
- add contextual menu command to output 0V if sample is stopped/paused
Woah! - good stuff Antonio!
Fantastic! Can’t wait to give them a whirl.
Installed, running fine thus far, my normal bread and butter modules all work as they should!. Thanks a whole bunch @synthi ! Almost back to most of what I need Things are looking better by the day
Jeez Antonio…
“INFINITE MELODY” sounds interesting, Bohingler is already pretty nice…
Thanks!
Bravo!! Thank you so much! The Mac build seems to be working well so far. I’m so happy to have Simplicter and my favorite recording modules now!
I’m curious about this other module with the Sussudio skin. I didn’t see anything like it in V1.
must be something unreleased and BROKEN
Testing on Ubuntu 18.04, no problems so far.
Thanks, Antonio !
Likewise. Looking good Sir!
I hope it’s another Phil Collins hit!