Leveling LFO for output on DC-coupled Interfaces

VCV Rack
1

how to level the signal of the LFO’s from signal-range -1 to +1. the LFO only works from -0.5 to +0.5. this is ok when using a ES-3. but when using an DC-coupled interface, the LFO has to go from -1 to +1 because the interface only produces - 5 to 5 volts. the ES-3 produces -10 to 10 volts.

havent found a module to double the level of the VCV LFO’s

cheers

2

any scaler+offsetter can do it

there at least 20 modules doing it

mines are

nysthi::constAddMult
and
nysthi::SoyUtils
and
(as byproduct) nysthi::Surveillance

1 Like