hello,
i try to trigger two actions consecutively with a push button.
in detail:
a push on a Patchmaster button should trigger a reverse clock on the the ZZC Clock Phasor AND after a short delay trigger a RESET of a ADDR-Seq.
I tested to patch only a reverse clock for both, but sometimes the ADDR-Seq is out of sync.
so it seems, a reset is neccessary.
Any ideas?
here is the reverse clock for ADDR. it works this way.
Try one of the count modula burst generators. They have start and end triggers so if you set it to 2 pulses it should probably do what you want. You feed it a clock for how long you want the delay to be and trigger it with the patchmaster button then use the end trigger for the reset.
